6 Installation
6.2
Signal strength & provider check
The GSM/GPRS signal strength can be checked during the installation process using s specific
icon on the meter LCD.
GSM/GPRS signal strength indication
Up to 4 signal strength symbols are used on the LCD to check a good reception:
Bar(s):
Signal strength
range:
Icon in LCD:
Additionally, the signal strength of the communication module can be seen on the LCD under
the OBIS identifier: 131.3.0
Provider indication
Additionally, the provider of the GSM/GPRS communication can be seen on the LCD under the
OBIS identifier: 25.6.0
COM200 module - Product Manual 1.0
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
1
-95 ... -86
-85 ... -76
dB
2
3
-75 ... -65
dB
dB
Page 18 of 25
4
>-65
dB
MetCom Solutions GmbH
www.node.com.tr
Need help?
Do you have a question about the COM200 Series and is the answer not in the manual?