Installation; Module Installation - Metcom Solutions COM200 Series Product Manual

6 Installation

6 Installation
6.1

Module installation

The module installation can be done following these steps even when the meter is powered:
1. Remove the meter terminal cover
3. Insert the Sim card to the communication
Module
5. Plug in the new communication module
COM200 module - Product Manual 1.0
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
2. Plug out the old communication module
4. Connect the external antenna (If available)
6. Close the meter terminal cover
Page 17 of 25
MetCom Solutions GmbH
www.node.com.tr