Table of Contents
Advertisement
Moving the meat pan.. .
The meat pan can be taken out and moved
the
same way as the shelves. Remove the meat pan first.
Removlng:
I. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaclng:
I, Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop into slots.
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
Changing the light bulb...
WARNING: Before removlng
the light shield for
cleaning
or for replacing
the bulb,
elther unplug refrigerator
or dlscon-
nect
electrlclty
leading
to
re-
trlgerator
at the main power supply.
Shock and Injury can occur if elec-
tricifv remains connected.
1.
Push in the (
Pull
2.
Push lightly on the top center of the light shield until
the notched
tab unhooks from the control panel.
Pull down on the shield until the tab clears the con-
trol panel.
3.
Lift the back hooks out of their slots.
4.
Replace
with a 40-watt appliance
bulb.
5.
Replace
light shield in reverse order
Removing the base grille...
To replace:
support
Tabs
1. Line up grille support tabs with metal clips.
2. Pull grille outwards as shown.
3.
Do not remove Tech sheet
fastened behind grille.
2. Push f/rmly to snap into place.
3.
Close the doors.
Ice cube trays.. .
If cubes are not used, they may shrink. The moving
cold air starts a slow evaporation.
The longer cubes
are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Slightly twist.
Advertisement
Table of Contents
