Changing The Light Bulb; Moving The Meat Pan; Adjusting The Refrigerator Shelves; Removing Crispers And Crisper Cover - Whirlpool ETl8EK Use & Care Manual

Changing the light bulb...
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigerator at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
1 Reach behind control console to find bulb
2. Remove bulb.
3. Replace with a 40-watt appliance bulb
Moving the meat pan.. .
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan first.
Removlng:
1. Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replacing:
I. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop Into slots
Lower front of cover to level position.
3. Replace meat pan In reverse order.
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
To remove shelves:
your refriaerator.
1. Tilt UD at front.
2. Lift up at back.
3. Pull shelf straight out
To replace:
1. Guide the rear hooks into the slots In the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the Crispers:
I. Slide crisper straight out to stop, lift front, then slide
Lift the Front, Then the Back.
the rest of the way out.
2 Replace in the reverse order.
Removing crispers and crisper cover.. .
Removing Cover:
I.
Lifi
front and remove the cover support
2. Lift out cover by pulling up and out.
Replacing Cover:
I. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab towards
the front.
Note:
If support needs adjustment, turn
base right to lower, or left to raise.
Pull out to stop.
:ifl the front and Pull Again.
6