Print Using P-touch Editor Lite (Windows
3
only)
P-touch Editor Lite
P-touch Editor Lite is a label creation software application for computers. With P-touch Editor Lite, there is no
need to install the application or printer drivers. Simply connect a USB cable to the label printer.
This application allows you to create and print simple labels with text, frames, and images.
a
Turn the printer On, then press and hold the P-touch Editor Lite Button until the green P-touch Editor Lite
LED turns on.
1 Editor Lite LED
2 Editor Lite Button
Note
P-touch Editor Lite is set to Off as the default mode.
b
Connect the USB cable to your computer.
Note
If you are connecting the printer via a USB cable, it may not be detected correctly. If this happens, unplug
the USB cable, make sure the printer is On, and then reconnect the USB cable.
2
1
3
3
3
13