Scanner Fatal Error Code - Epson M200 Series Service Manual

M200 / M205 / M100 / M105 Series

1.3.3 Scanner Fatal Error Code

This section describes the scanner fatal error code and the possible cause for this product.
Error code
10H Home position detection error
14H Measurement error
20H LED lightning error
36H Paper jam error
Note *1: The home seek pattern and the white standard pattern are attached on the back of the Scanner Housing Upper near the home
position.
*2: The rack section is the linearly-arranged toothed area on the Scanner Housing Lower. (See
Troubleshooting
Table 1-4. Fatal Error List (Scanner)
Error name
Figure 1-4. Rack section
Fatal Error Code List
• CIS Module failure
• Scanner Housing Upper failure (home seek pattern
• Scanner Housing Lower failure (the rack section
• Scanner Motor failure
• Insufficient grease
• Foreign object
• FFC disconnection/failure
• Main Board failure
• Scanner Motor failure
• Insufficient grease
• Foreign object
• Gear failure
• Deformation of the shaft
• CIS Module failure
• Foreign object
• Scanner Housing Upper failure (white standard pattern
• Main Board failure
• Paper jam
• Loading/ejecting papers out of the standard range or curled papers
• Using long papers (Legal or longer)
Rack section
Scanner Housing Lower
Possible cause
*1
is dirty)
*2
is damaged)
*1
is dirty)
Fig. 1-4.)
Revision A
17
Confidential