Epson M200 Series Service Manual page 54

M200 / M205 / M100 / M105 Series
Ink Supply Tank Tube Assy
0.5 mm or less
Ink Supply Tank
Ink Supply Tank Tube Assy
When connecting the Ink Supply Tank Tube Assy to the Ink
Supply Tank, insert the tube to the full and make sure the gap
between the end of tube and the tank is 0.5 mm long or less.
Make sure there are no twists.
Adapter
Adapter
Ink Supply Tube
Hook
Film Red line
Connection of Ink Supply Tubes
Ink Supply Tube
Be careful not to damage or peel off the film of the Adapter.
Use a precision screwdriver when releasing the hook of the
Adapter.
Install the Ink Supply Tube to the adapter with its red line facing
the right side of the adapter.
Disassembly/Reassembly
Valve Lever
Ink Supply
Tank Assy
Valve Lever
Flathead precision
screwdriver
Hook
Before removing the Valve Lever, release the hook on it with a
precision screwdriver or the like.
Ink Supply Tank
Adapter Rear
Ink Supply Tank
Hook
Film
Be careful not to damage or peel off the film of the Ink Supply
Tank.
Be careful about how to place the Ink Supply Tank Assy in
order to prevent printing failure from occurring. (See
TO PLACE THE INK TANK ASSY WHEN DISASSEMBLING/
)
REASSEMBLING (p26)"
Detailed Disassembly/Reassembly Procedure for each Part/Unit
Joint
Valve Lever
Joint
Cutout
When connecting the Ink Supply Tube to the joint, align the red line on the Ink Supply Tube to the protrusion on the side of the joint with a cutout.
When attaching the Joint, align the cutout of the Joint with the rib of the Ink Supply Tube Guide 2nd.
Make sure the gap between the end of Ink Supply Tank Tube Assy or Ink Supply Tube and the Joint is 0.5 mm long or less.
Front side
Film
Valve Position Label
Valve Position Label
Right side
Standard line
Apply the Valve Position Label without any floating parts or tilt while aligning the label with the standard line on the Housing Ink Supply Tank
"HOW
shown above.
Do not apply the Tank Caution Label over the textured section.
Joint
Ink Supply Tube
Ink Supply Tank Tube
Ink Supply Tube
Valve Position Label / Tank Caution Label
Housing Ink Supply Tank
Tank Caution Label
Standard line
Housing Ink Supply Tank
Revision A
Ink Supply Tank Tube
0.5 mm or less
Joint
0.5 mm or less
Red line Joint Protrusion
Cutout Rib
Textured section
Ink Supply Tank Cover
54
Confidential