Advertisement
Quick Links
3 Door Robe
Assembly Instructions
001 xx 6026
- Please keep for future reference
Dimensions
Width - 119.2cm
Depth - 49.8cm
Height - 200.0cm
MADE IN
GREAT BRITAIN
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Rev C - 07/02/17
Advertisement
Related Manuals for Addspace 3 Door Robe 001 6026 Series
Summary of Contents for Addspace 3 Door Robe 001 6026 Series
- Page 1 3 Door Robe Assembly Instructions 001 xx 6026 - Please keep for future reference Dimensions Width - 119.2cm Depth - 49.8cm Height - 200.0cm MADE IN GREAT BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
- Page 3 Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges 9869 (119.2x49.8cm) 9870 Bottom (114.6x46.4cm) 9860 Plinth x 2 (114.6x7.6cm) 9872 9865 9871 Divider (188.5x46.4cm) Left End Panel Right End Panel 9334 Back Rail (75.3x12.4cm)
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 01709 534 123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
-
Page 5: Exploded View
Exploded View 9869 7200 7194 9865 9876 9334 9875 0049 9872 9884 9874 0049 9871 9870 9860... - Page 6 Assembly Instructions Step 1 Fitting dowels to top panel. Insert 6 metal dowels into the top panel 9869 Note: Tighten metal 9869 dowels up fully against the panel. Do not over-tighten. Step 2 Connect the top rail to the top panel. 7200 Using 4 screws secure...
- Page 7 Assembly Instructions Correct Step 5 Attach hinges to the 3 doors and handles to 2 doors. Incorrect Insert hinges into holes, ensure the hinge is straight (90 degree angle). 0049 Before securing the Bradawl hinges , we recommend you pre - mark the doors using a bradawl.
- Page 8 Assembly Instructions Step 6 Fitting hanging rail support & hingeplates to left end. Insert 4 hinge plates into the left end panel 9865 Insert 4 screws through the holes in the hanging rail supports Note: A bradawl may be required when attaching 9865 the hanging rail support to create the lower hole.
- Page 9 Assembly Instructions Step 8 Fitting hanging rail support & hingeplates to right end. Insert 4 hinge plates into the right end panel 9871 9871 Insert 2 screws through the holes in the hanging rail supports Note: A bradawl may be required when attaching the hanging rail support to create the lower hole.
- Page 10 Assembly Instructions Step 11 Attach haing rail support and cams to the divider panel. Insert 2 metal cams 9872 into the divider panel 9872 Secure the hanging rail support bracket with 2 screws Step 12 Attach dowels and hinge plates. Insert 2 metal dowels 9872 and 4 hingeplates...
- Page 11 Assembly Instructions Step 14 Connect the right end panel to the bottom, and small shelf. Connect the dowels in 9871 9871 the right end panel to the cams in the bottom 9870 and the small shelf 9875 9875 Turn cams 180 degrees clockwise to lock.
- Page 12 Assembly Instructions Step 17 Connect the right end panel to the plinths and back rail. Connect the large shelf to the divider. We recommend that an additional person is used to support the plinth 9871 panels during this stage and the next stage. Connect the dowels in 9872 the divider panel...
- Page 13 Assembly Instructions Step 19 Connect the top panel to the divider and the end panels. Connect the dowels in the 9869 top panel to the cams in the left end 9865 9872 , divider 9869 the right end panel 9871 9871 9872 9865...
- Page 14 Assembly Instructions Step 21 Squaring up the unit. IMPORTANT! Ensure a tape measure is used 9143 to square unit up. 8588 Before securing the back it is necessary to square up the unit. Make sure that the back panel is still sat in the grooves.
- Page 15 Assembly Instructions Step 23 Add stability blocks. Slide the thin point of the stability blocks between the back panel 9876 and the grooves. Once inserted fully, tighten the screws in the stability blocks. 9143 8588 9876 8589...
- Page 16 Assembly Instructions Step 24 IMPORTANT! Fixing to wall We recommend that this This unit must be secured to the unit is fixed to a suitable wall prior to fitting the doors. wall to prevent possible overbalancing. We have Failure to do this could make the unit included a fixing bracket unstable and potentially dangerous for this.
- Page 17 Assembly Instructions Step 26 Fixing the shelf panel The internal shelf is optional and is not required for unit stability. If you wish to fit the shelf, insert the 4 shelf supports and seat the shelf panel on top of the supports.
- Page 18 Assembly Instructions Step 27 Hanging doors With help, slot door hinges onto hinge plates. Ensure screw on hinge slides into the slot on hingeplate. See Diagrams 1, 2 and 3. 9874 0049 Tighten screw shown to lock hinges in 0049 position.
- Page 19 Assembly Instructions Step 28 Hinge adjustment To move doors up or down: loosen screws shown and move doors to suit. Re-tighten screws. To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws. To move doors left or right: loosen or tighten screw as shown.
- Page 20 All calls will be actioned asap. You can also e-mail your requests to us at: customer.helpdesk@addspacefl.co.uk Alternatively, you can write to us at: Customer Service Department, Addspace Furniture Limited, Braithwell Way, Hellaby Industrial Estate, Hellaby, Rotherham, South Yorkshire, S66 8QY.
Need help?
Do you have a question about the 3 Door Robe 001 6026 Series and is the answer not in the manual?
Questions and answers