Table of Contents
Advertisement
After you have set the desired temperature, the
display will show the set temperature and the
time of day. BAKE will light up.
3. Push the Stop Time pad. The time of day with
the colon flashing and STOP TIME will show in
the display.
4. Use the Hour and Minute pads to set the
desired stop time. Push the "up" (A) or "down"
(V) pad(s) until the correct time shows in the
display.
This example shows a desired stop time of 2
o'clock. This provides a 2-hour cook time (the
difference between the time of day and the stop
time).
5. Push the Start/Enter pad. "Lo"", HEAT, TIMED
and BAKE will light up in the display to indicate
that the oven is heating.
NOTE: The display will show "door" and a tone
will sound once a minute for 5 minutes if the
door is latched when you try to bake/roast.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating just Steps 2 through 4.
6. The display will count down the baking/roasting
time in minutes.
7. When the baking/roasting time is completed,
the oven will turn off automatically, beep four
times and "End" will show in the display. You
will also hear four 1 -second tones every minute
until you push the Off/Cancel pad.
NOTE: To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTIMER" control setting:
l
Push the Off/Cancel pad to return the display to
the time of day.
20
Advertisement
Table of Contents
