Using Your Range; Using The Surface Burners - Whirlpool SF375BEP Use & Care Manual

Using your range
TOP LIGHT
OVEN
OVEN
SWITCH
TEMPERATURE
SELECTOR
(SF375BEP only] CONTROL
I
LEFT FRONT '
LEFT REAR SURFACE
RIGHT REhR
RiGHT FRONT
CONTROL KNOB CONTROL KNOB
BURNER
CONTROL KNOB
CONTROL KNOB
INDICATORS
Using the Surface
Burners
Control knobs must be pushed in,
then turned to the LITE position. The
clicking sound is the ignition
sparking.
To stop the clicking sound after the
burner lights, turn the control knob
back to a desired setting. The control
knob has stops for HI, MED and LOW,
however it can be set anywhere be-
tween HI and OFF.
Do not cook with
the control in the LITE posltlon.
Surface Burner Indicators
The solid dot in the surface burner in-
dicator shows which surface burner is
turned on by that knob.
In Case of a Prolonged Power Failure
Surface burners can be manually lighted. Hold a lighted match near a burner
and turn the control to the LITE position. After the burner lights, turn the control to
the desired setting.