Whirlpool SF375BEP Use & Care Manual page 17

Setting the Controls for Self-Cl
Be sure the kitchen is ventilated during I the Selt-Cleaning cycle. This will
remove normal smoke and heat odors trom the room as quickly as uossible.
leaning
1.
Make sure the Clock, Start and
Stop Times all have the right time
of day.
3. Set the Oven Selector and Oven
Temperature Controls to CLEAN.
5. Atter the Clean Cycle Is
completed and the oven tem-
perature has dropped below
500°F
(26O"C), the Clean Light
goes off and the Lock Lever can
be moved back to the COOK
posltlon.
Do not
lore8 It. Wait
until it moves easily.
Turn the
Oven Selector and Oven
Temperature Controls to OFF.
2. Push in the Stop Time Knob and
turn the hand
clockwlse 2-4
hours. 3 hours is recommended
for moderate soil. Use 2 hours
for light soil. Use 3-4 hours
for heavy soil.
4. Move the Lock Lever to the CLEAN
position. This will start the Self-
Cleaning Cycle. If the door is not
completely closed or the lever
is not all the way to the right, the
cycle will not start.
When the oven temperature
exceeds normal baklng tem-
peratures,
the oven door can't
be opened and the Lock Lever
must not be moved.
6. After the oven Is cool,
wipe off
any residue or ash with a damp
cloth. If needed, touch up spots
with cleaner or olasttc scourina
I