Front Light Group - VESPA S 125 Manual

Instrument panel light bulbs
License plate light bulb
Quantity: 5
Type: All glass
Power: 12V - 2W
Quantity: 3
Type: ALL GLASS
Power: 12V - 5W
Quantity: 1

Front light group (03_25, 03_26, 03_27, 03_28)

To access the headlight bulbs, remove the front of the handlebar cover, as follows:
1. Remove the rear-view mirrors.
2. Unscrew the 3 screws holding the handlebar cover. The front central screw «B»
and the 2 rear screws «A». Once this is done, the handlebar cover can be removed.
To replace the high-/low-beam headlight bulb :
1. Disconnect the power contacts and remove the rubber protection «C».
03_25
2. Remove the retaining clip «D» and slide off the bulb.
To replace the tail light bulb:
1. Slide off the rubber bulb holder «E» from its fitting.
2. Hold and slide off the bulb.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS RELATED TO THE HUMIDITY AND/OR
TO LOW TEMPERATURES.
03_26
46