Shock Absorbers Adjustment - VESPA S 125 Manual

Rear tyre Tubeless, 120/70 - 10'' 54L

Shock absorbers adjustment (02_04, 02_05)

The preloading of the spring can be adjusted to 4 positions using the ring nut located
in the lower part of the shock absorbers and the specific spanner supplied.
Position 1: minimum preload: driver only
Position 2 medium preloading: driver only
Position 3 medium preloading: rider and passenger
Position 4: maximum preloading: driver, passenger, and luggage.
02_04
In order to carry out this operation you will need to use the specific spanner in the kit.
Spring preload increases by turning the ring nut towards «A», but decreases if the ring
nut is turned towards «B».
CAUTION
RIDING THE VEHICLE WITH THE SPRING PRELOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.
02_05
WARNING
WE RECOMMEND WEARING GLOVES WHILE CARRYING OUT THIS OPERA-
TION IN ORDER TO AVOID INJURIES.
20