Front Light Group - VESPA S 125ie 3Valvole Manual

Rear turn indicator light bulb
Instrument panel bulb
High-beam warning light bulbs,
turn indicator, fuel reserve, engine
check, oil pressure
Type: Incandescent, BAU 15S,
Amber
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
Type: Incandescent
Power: 12V - 1.2W
Quantity: 2
Power: 12V - 2W
Quantity: 1
Type: Incandescent
Power: 12V - 1.2W
Quantity: 5

Front light group (03_23, 03_24, 03_25, 03_26, 03_27)

To access the headlight bulbs, remove the front of the handlebar cover, as follows:
1. Remove the rear-view mirrors.
2. Undo the three screws holding the handlebar cover. The front central screw «B»
and the two rear screws « A». Once this is done, the handlebar cover can be removed.
To replace the high-/low-beam headlight bulb:
1. Disconnect the power contacts and remove the rubber protection «C».
03_23
2.Remove the retaining clip «D» and slide off the bulb.
To replace the tail light bulb:
59