Front Light Group - VESPA S 125 ie e Manual

Instrument panel bulb
Daylight running light, fuel reserve
and engine check warning light
bulbs.
Oil pressure, turn indicator and
low-beam light warning light bulbs.
Power: 12V - 5W
Quantity: 1
Type: Incandescent
Power: 12V - 2W
Quantity: 3
Type: Incandescent
Power: 12V - 2W
Quantity: 3
Type: Incandescent
Power: 12V - 1.2W
Quantity: 3

Front light group (03_28, 03_29, 03_30, 03_31)

To access the headlight bulbs, remove the front of the handlebar cover, as follows:
1. Remove the rear-view mirrors.
2. Undo the three screws holding the handlebar cover. The front central screw «B»
and the two rear screws « A». Once this is done, the handlebar cover can be removed.
To replace the high-/low-beam headlight bulb:
1. Disconnect the power contacts and remove the rubber protection «C».
03_28
2.Remove the retaining clip «D» and slide off the bulb.
To replace the tail light bulb:
1.Slide off the rubber bulb holder «E» from its seat.
52