Lighting Standing Pilots - Whirlpool SF3000SW/EW Use And Care Manual

Standard-cleaning gas range
Table of Contents

Advertisement

After the burner lights, turn the control
knob to the desired setting. Power
failures will not affect standing pilots.
Burn, Fire and Explosion
Hazard
B Burner flame should not extend
beyond the edge of the cooking
utensil. The flame can burn you
and cause poor cooking
results.
B Be sure all control knobs are
turned to OFF when you are not
cooking.
Someone could be
burned or a fire could start if a
burner is accidentally
left ON.
B If the flame should go out while
cooking,
or if there is a strong
gas odor, turn the burners OFF.
Wait five minutes for the gas
odor to disappear,
before
relighting
burner. If gas odor is
still present, see safety note on
page 3. Failure to follow these
precautions
could result in
explosion
or fire.
B Do not attempt to light the oven
burner during a power failure.
Personal injury could result.
Lighting standing pilots
To light range pilots:
I. Make sure all controls are OFF.
2.
Remove the surface burner grates
from the cooktop. Remove the
cooktop. (See "Removable cooktop
on page
15.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf3000swSf3000ew

Table of Contents