Honeywell RFID Kit Installation Manual page 2

Introduction
The RFID kit provides RFID functionality for PX4ie and PX6ie printers. With this
kit installed, the PX4ie or PX6ie printer can read and write to RFID tags.
These instructions describe how to install the following RFID kits:
• PX4ie 915 MHz RFID Kit (P/N 50147009-001)
• PX4ie 869 MHz RFID Kit (P/N 50147010-001)
• PX6ie 915 MHz RFID Kit (P/N 50147011-001)
• PX6ie 869 MHz RFID Kit (P/N 50147012-001)
For more information about using RFID features on the PX4ie or PX6ie, see the
EasyCoder Printer RFID User's Guide (P/N 934-041-xxx).
Contents
• One of the following RFID interface boards:
• RFID interface board with IM11 869 MHz radio module
• RFID interface board with IM11 915 MHz radio module
• One of the following lower media guides:
• PX4ie lower media guide with RFID antenna
• PX6ie lower media guide with RFID antenna
• Dual slot I/O cable
• M3x5 screw (2)
• M4x5 screw
• Spacer screw
PX4ie/PX6ie RFID Kit Installation Guide 1