Whirlpool RS660BXV Use & Care Manual page 9

Adjusting the Oven Tempemture Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without you noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
LOCKIN
SCREW
1.
Pull the Oven Temperature Control 2. Loosen the lockina screw Note
Knob straight off. the position of fh& notches.
I
OFF
'NOTCHES
3. To lower the temperature,
move
the tooth a notch closer to LO.
Each notch equals about 10°F
(5°C).
OFF
TOOTH
4. To raise the temperature,
move
the tooth a notch closer to HI. Each
notch equals about 10°F (5°C).
Tighten fhe locking screw and
replace the control knob.