Whirlpool RS660BXV Use & Care Manual page 15

3. Hold the surface unit as level as
possible with the terminal just
started into the receptacle. Push
the surface unit terminal into the
receptacle.
2.
Line up 0~
bowl with
tacle and
clip.
lenings in the reflector
the surface unit recep-
the element hold dow
4. When terminal is pushed into the
receptacle as far as it will go, push
down the edge of the surface unit
opposite the receptacle. The ele-
ment hold down clip will keep the
surface unit from moving around.
CAUTION: Reflector bowls reflect heat back to the utensils on the
surface unlfs. They also help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl gefs dlscoiored, some of the utensils may not be
flat enough, or some may be too large for the surface unit In elfher
case, some of the heat that's meant to go info or around a utensil
goes down and heats fhe reflector bowl. This extra heat can discolor
if. See Cooklng Guide for further information.
15