Safety - Earth Networks AXIS Q6155-E System Installation, Operation And Maintenance Manual

Safety!

Only qualified personnel should install the HD PTZ Camera System.
While installation of the HD PTZ Camera is not particularly difficult, it does usually require
installation near the rooftop and working with electrical wiring, which presents some amount
of risk.
To limit risk to self and property, this manual should be thoroughly read and understood
before beginning installation. Adhere to all warnings on the unit and in the operating
instructions.
Installation must conform to national, state, and local building code requirements with the
most stringent guidelines being adhered to.
The HD PTZ Camera should only be installed by someone comfortable with being on a high
ladder or rooftop and who is authorized by the site to perform the installation. Roof and
ladder safety is crucial!
Allow only qualified Electricians to make electrical connections. Take all reasonable safety
precautions – double checking a power cable connection could save a life.
Stay as far away from other electrical wiring as possible. Never allow the camera housing,
the cabling, a drill bit, or any other item to contact electrical wires or conduit. Injury or
death could result.
A qualified installer will need to securely mount the unit to a supporting structure capable of
sustaining the weight of the unit (approximately 12 pounds) by using appropriate tools and
hardware. Failure to properly secure the HD PTZ Camera could result in the unit separating
from the support structure and falling. This would not only damage the camera, but could
injure anyone standing nearby.
If needed, Earth Networks may be able to provide professional installers and an estimate of
the cost. If this is desired, please call Earth Networks Support at 800-624-4205 or email
support@earthnetworks.com.