Using The Remote Control - Dell 1100MP Owner's Manual

Using the Remote Control

Video Mode
1
Next Page
2
Menu
3
4:3/16:9
4
Hide button
5
Volume +/-
6
Keystone adjustment If your image is not perpendicular to the screen,
7
270
Using Your Projector
Press once to show the current display mode.
Press the button again to toggle between PC,
Movie, sRGB, or User mode.
Press to move to the next page.
NOTE:
The USB cable must be connected to
use this function.
Press to activate the on-screen display (OSD).
Use the directional keys and the Menu button to
navigate through the OSD.
Press to switch the apect ratio: 1:1, 16:9, 4:3.
Press to hide the image, press again to display the
image.
Press to increase (+) or decrease (-) the volume
or toggle through the OSD tabs.
then it does not appear square. Press to adjust
image distortion caused by tilting the projector
(±16 degrees).