Computer Image Menu; Video Image Menu - Dell 1100MP Owner's Manual

Computer Image Menu

NOTE:
This menu is only available connected to a computer.
NOTE:
Adjust the Frequency first and then the Tracking.
—Press the
OR OSITION
H . P
remote control to adjust the horizontal position of the image to the left and press the
button the control panel or the
horizontal position of the image to the right.
—Press the
ER OSITION
V . P
remote control to adjust the vertical position of the image down and press the
button the control panel or the
position of the image up.

Video Image Menu

NOTE:
This menu is only available with S-video, Video (composite) signal
connected.
the control panel or the
276
Using Your Projector
REQUENCY
F
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
—Synchronize the phase of the
RACKING
T
display signal with the graphics card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
button on the control panel or the
button on the remote control to adjust the
button on the control panel or the
button on the remote control to adjust the vertical
ATURATION
S
control panel or the
control to decrease the amount of color in the
image and press the
panel or the
to increase the amount of color in the image.
HARPNESS
S
panel or the
decrease the sharpness and press the
button on the remote control to increase the sharpness.
—Change the display data clock
—Press the button on the
button on the remote
button the control
button on the remote control
—Press the button on the control
button on the remote control to
button on the
button on the
button