The Storage Drawer; Brackets - Whirlpool RS313PXY Use And Care Manual

The storage drawer
You can remove the storage drawer to make
it easier to clean under the range, and to
check for installation of the anti-tip brackets.
Use care when handling the drawer.
Removing the storage drawer:
1. Empty drawer of any pots and pans
before removing drawer. Pull drawer
straight out to the first stop. Lift front and
pull out to the second stop.
2. Lift back slightly and slide drawer all the
way out.
Replacing the storage drawer:
1. Fit ends of drawer slide rails into the
drawer guides on both sides of opening.
2. Lift drawer front and push in until metal
stops on drawer slide rails clear white
stops on drawer guides. Lift drawer front
again to clear second stop and slide
drawer closed.
slide rail
The anti-tip brackets
The range will not tip during normal use.
However, tipping can occur if you apply too
much force or weight to the open door
without the anti-tip brackets properly
secured.
To verify the anti-tip brackets are
engaged:
l
Remove storage drawer.
l
Look to see if the anti-tip brackets are
attached to floor with screws.
l
Make sure rear leveling legs are posi-
tioned under brackets.
l
See Installation Instructions for further
details.
18