Method For Changing Oil In Final Drive Case - Komatsu PC80MR-5E0 Operation & Maintenance Manual

MAINTENANCE
4.
Open the dirt cover (1) fully and it will be secured by the
cover support lever (2).
5.
Add oil through the pipe for dipstick (G) by the refill capaci-
ty.
6.
Check the oil level in the swing machinery case.
Check that the oil level is between H and L of dipstick (G).
For the oil level check procedure, see "METHOD FOR
CHECKING OIL LEVEL IN SWING MACHINERY CASE,
ADDING OIL".
7.
Remove cover support lever (2) and fix it to the lever lock
securely.
8.
Close dirt cover (1).

METHOD FOR CHANGING OIL IN FINAL DRIVE CASE

• Immediately after the engine is stopped, its parts and oil are still very hot and may cause burn in-
jury. Accordingly, wait until they have cooled down before starting the work.
• If there is remaining pressure inside the case, the oil or plug may jump out. Loosen the plug slowly
to release the pressure.
• Do not stand in front of the plug when you loosen the plug.
Refill capacity (each of right and left): 1.1 ℓ
Items to be prepared
• Container to catch oil
• Hexagonal wrench
k k
WARNING
WENAM00241
MAINTENANCE PROCEDURE
RKA68445
RKA68900
4-63