Komatsu PC80MR-5E0 Operation & Maintenance Manual page 102

EXPLANATION OF COMPONENTS
ATT/P mode
For operations of 2-way attachment such as crusher (For machines ready for installation of attachment)
ATT/E mode
For operations with emphasis on fuel consumption out of those of 2-way attachment like crusher (For machines
ready for installation of attachment)
• When the machine monitor is turned on, it is automatically set to the mode used when the starting switch
was turned to OFF position last.
• Press the function switch "F5", and the working mode selection screen is displayed. For each set mode,
"P", "E", "L", "B", "ATT/P" and "ATT/E" are displayed on the working mode display at the center of the moni-
tor display.
• When the working mode is changed and screen returns to the standard screen, auto-deceleration function
is automatically selected.
Ask your Komatsu distributor to change the setting if you want to have the automatic setting of "P", "E", "L", "B",
"ATT/P" or "ATT/E" modes (optional default setting) when starting the engine.
How to use the working mode selecting function
Select the working mode after starting the engine.
1.
Press the function switch "F5", and the working mode se-
lection screen is displayed on the machine monitor.
2.
Select the working mode with the function switches "F1",
"F2", and "F5", and enter with the function switch "F4".
To return to the standard screen without changing the
working mode, press the function switch "F3".
If a working mode is selected, and nothing is done for 5
seconds, the selected working mode is automatically en-
tered and the screen returns to the standard screen.
3.
After the working mode is set, the working mode is dis-
played in yellow in the center of the monitor display.
4.
2 seconds later, yellow returns to blue.
BUZZER CANCEL FUNCTION
Perform the setting of working mode selection after starting the engine.
3-34
WENAM00241
OPERATION
RKA64030