Komatsu PC80MR-5E0 Operation & Maintenance Manual page 116

EXPLANATION OF COMPONENTS
2.
"Attachment Name Setting" screen is displayed.
On "Attachment Name Setting" screen, you can perform
the following operations with function switches "F1" to "F4",
"F6", "F7", and "F8".
Function switch "F1"
Moves to the previous alphabet, numeral, or symbol.
Function switch "F2"
Moves to the next alphabet, numeral, or symbol.
Function switch "F3"
Returns the screen to "Attachment Setting" screen without changing the name.
Function switch "F4"
Enters the change and returns the screen to "Attachment Setting" screen.
Function switch "F6"
Moves to the left letter.
When on the first letter, it moves to the last letter.
Function switch "F7"
Moves to the right letter.
When on the last letter, it moves to the first letter.
Function switch "F8"
If some input letter is left, "CLEAR" is displayed.
Clears all the letters.
If all the letters are cleared, "DEFAULT" is displayed.
Displays the initial name.
It is not possible to change the name for "No Attachment" setting.
Changing "2-Way Attachment Oil Flow Rate Setting"
You can change the flow rate of each attachment setting to the arbitrary value.
1.
Select an attachment setting to change its flow rate on "At-
tachment Setting" screen, and then press function switch
"F6".
2.
The "2-Way Attachment Oil Flow Rate Setting" screen is
displayed.
On "2-Way Attachment Oil Flow Rate Setting" screen, you
can perform the following operations with function switches
"F3", "F4", "F6", and "F7".
Function switch "F3"
Returns to "Attachment Setting" screen without changing
the flow rate.
3-48
WENAM00241
OPERATION