Unpacking; Packet In Crate - Vitronics Soltec myReflow Installation Manual

2.3 U
NPACKING
The Vitronics Soltec myReflow is packed on a wooden pallet. When necessary, the machine is
packed in crates (e.g. when shipped).
If packed in crates the following procedure (paragraph
When the machine is packed on a wooden pallet follow instructions in paragraph
2.3.1 P
ACKET IN CRATE
F 2.2
IGURE
Use the above figure order A,B,C to uncrate. Other order can result in damaging the machine or
personal injury.
2.3.2 P
ACKED ON WOODEN PALLET
F 2.3
IGURE
2
C 2
HAPTER
I
NSTALLATION
A
B
C
C
RATE
P
ACKING REMOVAL
2.3.1 and 2.3.2) should be followed.
Uncrating order:
1. Take off top cover A.
2. Remove side panels B.
3. Remove front and backcover C.
1. Remove packing material
2.3.2.