Table of Contents
Advertisement
ATT
Function
Selects the output level to the radio equipment
Default
ON
Format
ATT_ {ON/OFF} [CR]
Parameter
ON : Lower level
OFF : Higher level
Details
Selects the output level to the radio equipment
Refer to Level Adjustment at page XX for details
Example
ATT_ON [CR]
ATX
Function
Send digital image
Default
None
Format
ATX [CR]
Parameter
None
Details
An image must be captured and stored into memory before it can be sent.
Note: Optional memory module MUST be installed to use this function.
Example
ATX [CR]
AVT
Function
Activate the Video through function when capturing an image
Default
ON
Format
AVT_ {ON/OFF} [CR]
Parameter
ON : Activate the Video through function
OFF : Deactivate the Video through function
Details
When the AVT command is ON, pressing the TX switch will enable output of the
video signal connected to the Video Input to be passed to the video output so that
you can monitor the video image. Press the TX switch again to capture the image
and then transmit it through the radio equipment.
When the AVT command is OFF , pressing the TX switch will automatically
capture the video image and then transmit it through the radio equipment.
Example
AVT_ON [CR]
29
Advertisement
Table of Contents
