Table of Contents
Advertisement
AHL
Function
Set the duration of the synchronization header
Default
100 (1 second)
Format
AHL {050 – 198} [CR]
Parameter
050 – 198 (0.02 incremental)
Details
Sets the duration of the synchronization header
{100} represents 1.00 second .
Example
AFC_146 [CR]
ALF
Function
Add the LF (Line Feed) code at the end of the CR code
Default
ON
Format
ALF {ON/OFF} [CR]
Parameter
ON : Add the LF code at the end of the CR code
OFF : The LF will not be added to the end of the CR code
Details
When this command is set to ON, it facilitates the entry of new data from the
transmit terminal, as a new line is automatically started (and the previous line is
automatically sent).
Example
ALF_ON [CR]
ARA
Function
Monitor both digital/analog voice signals or monitor digital voice only
Default
ON
Format
ARA_ {ON/OFF} [CR]
Parameter
ON : Monitor digital voice and Analog voice
OFF : Monitor Digital voice only
Details
Monitor both digital/analog voice signal or monitor digital voice only
Example
ARA_ON [CR]
Set duration to 1.46 seconds.
28
Advertisement
Table of Contents
