Table of Contents
Advertisement
Transmit
Enter the command [ACO] to go into the converse mode.
Type text from the keyboard, then hit the enter key at the end of the text.
NNNNNNNN [CR]
NNNNNNNN ASCII character
[CR]
Note: Maximum data length is 2046 bytes per packet.
T o send binary data, add [FE] (hexadecimal) to a header and footer with the data.
FE BBBBBBBBBBBBBBBB FE
BBBBBBBBBBBBBBB Binary data
FE
Note: If you need to insert the data [FE] in hexadecimal in the middle of the text,
convert it into two (2) bytes of hexadecimal data.
FE
If you need to insert the data [FD] in hexadecimal in the middle of the text,
convert it into two (2) bytes of hexadecimal data.
FD
Note: Maximum data length is 2046 bytes per packet.
At the receive side, the data will be automatically decoded and displayed on the PC screen.
If the [ALF] command is set ON, the LF (line feed) code will be added at the end of received
data.
Carriage Return
ID as a binary data
FDD8
FDDD
20
Advertisement
Table of Contents
