Technical Specifications; Electrical Specifications; Light Distribution; Physical Specifications - NeoLight SKYLIFE User Manual

7. TECHNICAL SPECIFICATIONS*

7.1 ELECTRICAL
AC Power
Type of Protection Against Electrical Shock
Degree of Protection Against Electrical Shock
Degree of Protection Against Ingress of Water
Mode of Operation

7.2 LIGHT DISTRIBUTION

Light Intensity distribution map on Bed (with GelMat and Cloud Swaddle). Maximum intensity in the center.
The ratio of minimum to maximum measured intensity across the effective surface area is >0.4 (avg. 0.79).
7.3 PHYSICAL

Physical Specifications

Device Dimensions
Device Weight
Patient Area
Effective Surface Area
Light Distribution Ratio (min to max)
Controller Dimensions
Controller Weight
Length of device cord to controller
Length of connecting cord between controller and
power adapter
Length of power cord from adapter to plug
Storage and Transportation Conditions
Temperature
Relative Humidity
Operating Conditions
Temperature
Relative Humidity
*Specifications subject to change without notice.
90-264 VAC, 50-60 Hz, 1.0A/115V- 0.5A/230V
Class II Equipment
Type BF Applied Part
IP23
Continuous
(The Cloud Swaddle attenuates an average of 0.4 μW/cm²/nm.)
23.94" L x 12.25" W x 1.91" H (60.81 x 31.12 x 4.85 cm)
<11lbs (5 kg)
21.41" L x 10.24" W (54.38 x 26 cm)
119in (769 cm )
2 2
>0.4 (avg. 0.79)
4.75" L x 2.75" W x 0.89" H (12.07 x 7 x 2.26 cm)
<0.5lbs (0.23 kg)
20" (50.8 cm)
53" (134.62 cm)
66.5" (168.91 cm)
-25 C to +50 C (-13 F to 122
o o o
10%-93% RH Non-condensing
10 C to 37 C (50 F to 98.6
o o o
15%-90% RH Non-condensing
F)
o
F)
o
500007, Rev P, Pg 15