Calibration; Labeling Standards; Operating Conditions - NeoLight SKYLIFE User Manual

Displayed Warnings & Alarms

6.3 CALIBRATION

The Skylife device has been calibrated to Z540 STANDARD TRACEABLE CALIBRATION.
No calibration is required by the user.

6.4 LABELING STANDARDS

Skylife device labels have been designed to ISO 15223-1.

6.5 OPERATING CONDITIONS

The Skylife system should be operated in temperatures between 50°F and 98.6°F (10°C and 37°C),
atmospheric pressures between 50 and 106 kPa (7.25psi to 15.37psi), and relative humidity between 15% and
90% RH.
Action
Press any button on the keypad to acknowledge the warning.
Verify that the vents are not blocked or covered, remove any obstructions.
Treatment may continue unless alarm repeats.
If alarm repeats, discontinue treatment and contact NeoLight Customer Service.
Consult with treating physician for further treatment options.
Press Power button to turn off device and suspend treatment for a
minimum of 20 minutes to allow device to cool.
Verify that the vents are not blocked or covered, remove any obstructions.
Treatment may continue unless alarm repeats. If alarm repeats,
discontinue treatment and contact NeoLight Customer Service.
Consult with treating physician for further treatment options.
Contact NeoLight Customer Service for troubleshooting.
500007, Rev P, Pg 13