Lift-Up Cooktop - Whirlpool RF391PXW Use And Care Manual

3. When the terminal is pushed into the
receptacle as far as it will go, push
down the edge of the surface unit
opposite the receptacle. The element
hold down clip will keep the surface
unit from moving around.
Reflector bowls reflect heat back to
the utensils on the surface untts. They
also help catch spills. When they are
kept clean, they reflect heat better and
look new longer.
If a trim ring gets discolored, some of
the utensils may not be flat enough, or
some may be too large for the surface
unit. In either case, some of the heat
that's meant to go into or around a uten-
sil goes down and heats the trim ring.
This extra heat can discolor it. See
Cooking Guide for further Information.
Lift-up cooktop
1. Lift front of cooktop at both front
corners until the support rods lock
into place.
Personal Injury and Product
Damage Hazard
l
Be sure both support rods are
fully extended and in the locked
position. Failure to do so could
result in personal injury from
the cooktop accidentally falling.
9 Do not drop the cooktop.
Damage can result to the por-
celain and the cooktop frame.
2. Wipe with warm soapy water. Use
a soapy steel wool pad on heavily-
soiled areas.
19