Use Easyset And Winflash To Upgrade Your Sf61B Firmware - Honeywell SF61 Series User Manual

2. Remove your SF61B from the host's list of Bluetooth devices:
3. Close the host's Outgoing COM port if it is open.

Use EasySet and WinFlash to Upgrade Your SF61B Firmware

To Upgrade Your Scanner Firmware
1. Connect the SF61B to the host in SPP outgoing (host initiated) connection -
2. Start the latest version of EasySet and select the SF61B product (Product >
3. From the Tools menu, select Upgrade product firmware to start WinFlash.
4. Select your scanner model and click OK.
5. Click Browse to find the correct .bin firmware upgrade file you downloaded for
SF61 Cordless Scanner User's Guide
• Double-click the Bluetooth icon in the system tray, select your scanner and
click Remove device (or equivalent).
see To Connect in SPP Device Profile—Outgoing Connection
Select > Handheld scanners) if it is not already selected.
If WinFlash is not already installed you will be asked to install it - click Yes and
follow the installation instructions.
If you are connected to EasySet for online setup, a message will ask if you want
to quit online setup mode and start WinFlash.exe. Click Yes to continue, the
scanner disconnects (the blue Honeywell Ready-to-Work indicator goes off)
and then restarts (2 beeps and vibrate alert by default).
your product model and click Next.
on page 21.
45