Configure The Postamble; Configure Your Scanner With Easyset - Honeywell SF61 Series User Manual

Hungarian 101-key

Configure the Postamble

The default postamble is <CR> <LF>. For certain applications or when using your
scanner as an HID Bluetooth device you may need to change this setting. Use the
following configuration barcodes to change the default postamble in your scanner.
More postamble options are available with EasySet or with your Honeywell
computer (see
from Your Honeywell Computer
Carriage Return + Line Feed (*)
Carriage Return

Configure Your Scanner with EasySet

EasySet is Honeywell Windows-based scanner setup software application.
You can use EasySet to set up your scanner product in two ways:
•
•
•
If it is not already installed on your host PC, download and install the latest version
of EasySet at this link on the Honeywell website: https://hsmftp.honeywell.com/.
SF61 Cordless Scanner User's Guide
Configure Your Scanner with EasySet
Online setup—send configuration commands from EasySet directly to your
scanner.
Online setup via the SD62 base station—send configuration commands from
EasySet to the scanner via the SD62 base station
Offline setup-send configuration commands to a barcode setup sheet, print out
the setup sheet and scan the barcodes with your scanner.
in the present chapter).
Slovakian Windows
and Configure Your Scanner
None
Enter
33