Captuvo SL22/42 ™ Enterprise Sled for Apple iPod touch 5/6 and iPhone ® ® ® Quick Start Guide Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español. Перейти на русскоязычный сайт www.honeywellaidc.com.
Note: An imager is standard with the healthcare devices. Note: Honeywell is not an authorized Apple repair center. Please return only your sled to us for repair. Honeywell is not liable for any non-Honeywell product shipped to our repair center.
Front View Door Release On/Off Button (non-healthcare sleds Door Release only) (non-healthcare sleds only) Volume (SL42)/ Scan Buttons Audio Jack Scan (non-healthcare Button sleds only) Battery Door Speaker Speaker Mini USB Port (for charging) Charging Contacts (for charge base only)
Back View – Non-Healthcare Sled Lanyard Slot Security Mechanism (non-healthcare sleds only) Magnetic Stripe Reader (optional) Security Mechanism (non-healthcare Imager (optional) sleds only) Main Camera Access...
Back View – Healthcare Sled Lanyard Slot Battery Door Imager Main Camera Access...
Ensure all components are dry prior to mating sleds/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty.
Non-Healthcare Sled Battery (1150 mAh) Battery Door Battery...
Healthcare Sled Battery (3340 mAh) Battery Door Battery...
Installing the Apple Device into a Non- Healthcare Sled 1. For non-healthcare sleds, open the door by pushing the top toward the front of the sled. 2. Slide your device into the sled. Note: Be careful that the connectors are not accidentally damaged.
Installing the Apple Device into a Healthcare Sled 1. For healthcare sleds, remove the four TORX (T6) screws on the back of the unit. Note: If you are using an Apple iPhone 5c, carefully remove the adapter that is pre-installed in the sled. If you are using an Apple iPhone 5/5s, leave the adapter installed.
2. Place the Apple device into the sled and press the top and bottom housings together and tighten the four screws. Be certain not to over tighten the screws. ® TORX (T6)
Non-Healthcare Sled Security Mechanism Note: To reduce the risk of the Apple device being removed or disengaging from the non-healthcare sled, we recommend that you lock both of the security mechanisms. TORX (T5) Security Mechanism Security Mechanism...
Charging Using Wall Adapter Note: If you use the wall adapter, both the sled and the iOS device charge. Note: Use the adapter that came with the iPhone 5 packaging to charge the phone and the sled.
Charging using USB to PC Note: When the iOS device is in the sled and it is connected to a PC/ laptop, only the sled charges. The iOS device cannot be charged or updated via USB. LED Indicators Color Indication Blink Red Sled’s battery power is low (8% and below);...
Demo Apps To test scanning a bar code, download the Honeywell Price Check application from the Apple App Store . This application is for demonstration purposes only and does not process any data. Application Software The sleds require special application software. Please refer to www.honeywellaidc.com/iosapps...
Healthcare Housing Cleaning Directions (Healthcare models only) Important: The following cleaning solutions have been tested to assure safe cleaning of your sled’s disinfectant- ready housing. They are the only solutions approved for use with this sled. Damage caused by the use of cleaners other than those listed below may not be covered by the warranty.
For patent information, refer to www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.