Table of Contents
Advertisement
Introduction
Introduction
General
Areas Not Covered by this Manual
The INDeX 30 Cabinet
Installation & Maintenance
INDeX 30
This manual covers the installation and maintenance of an INDeX 30 system with
INDeX Level 9.1/9.2 software. It is intended for use by installers and maintainers
who have successfully completed the appropriate INDeX training courses.
Ensure that you have read and understood this manual before beginning
installation.
This manual does not cover the following areas:
– INDeX 30 Technical Data :
Descriptions of the functionality, features and performance of the INDeX 30 are
covered by the INDeX Product Description.
– System Programming :
System programming is necessary for installation and maintenance of the
INDeX 30. This manual only covers very basic programming, for full details refer
to the INDeX System Programming Manual.
– Terminal Usage :
This manual does not detail the usage and functionality of INDeX terminals. The
details are found in the appropriate User Guides.
– Other Equipment :
Other INDeX peripheral equipment such as NOCpro and DECT have their own
installation manuals which cover any necessary changes to the INDeX 30
installation.
The major elements of the INDeX 30 cabinet are:
Optional Battery Back-up Kit
On/Off Switch
Safety
Earth Terminal
Power Supply
Socket
Cover Retaining Screw
Ethernet Socket
Two Lamps:
Power On (Green)
Running on Batteries (Yellow)
MDF 32 Pair Cable Socket
Cover Retaining Screw
External MOH Port
Serial Ports 2 & 1
38DHB0002UKDF- Issue 4 (07/2001)
General - Page 3
Introduction - Page 3
Advertisement
Table of Contents
