Keystone KSTAP12B Instruction Manual page 13

Installation
Type 2: Sliding Window Installation
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Cut the adhesive foam seal A
and B strips to the proper
lengths, and attach them to
the window sash and frame
as shown.
Foam seal C
(Non-adhesive type)
Cut the non-adhesive foam
seal C strip to match the
window height. Insert the foam
seal between the glass and the
window frame to prevent air
and insects from getting into
the room.
Insert the window slider adaptor
into the hole of the window slider.
Note: To ensure proper function, DO NOT overextend or bend the hose.
Make sure that there is no obstacle around the air outlet of the exhaust
hose (in the range of 500mm) in order to the exhaust system works
properly. All the illustrations in this manual are for explanation purpose
only. Your air conditioner may be slightly different. The actual shape
shall prevail.
7
Window slider B
(if required)
Window slider A
Insert the window slider
assembly into the window
opening.
Security
Bracket
2 Screws
If desired, install the security
bracket with 2 screws as shown.
8