Advertisement
3. Use the provided 1/8" Allen hex key to remove the (4) button
head screws that are securing the cactus to the back and
bottom of the wooden frame. Keep these screws, they will be
reused. See Figure F.
4. Remove the old cactus from your chair.
5. Repeat the Steps 1-4 for the second cactus.
Figure F
4
INSTALL COMBO CHAIR CACTUS 2.0 BRACKET:
6. Place the new Cactus 2.0 Bracket in the same orientation as
the removed bracket. Using the removed (4) bracket screws,
secure the new bracket onto the wooden frame as shown in
Figure G. The (2) shorter screws will go on the vertical side,
the (2) longer screws will go in the bottom.
for vertical wall
Figure G
7. Use (2) provided screws and a Phillips head screws to tighten
the bracket to the top of the wooden frame.
8. Repeat Steps 5 and 6 for the other Cactus 2.0
Advertisement
