Advertisement
YellowFlames:
Further a djustment is required.
YellowTipson OuterCones:
Normal forLPGas.
Soft
Blue Flames:
Normal for Natural Gas.
If the flame is completely or mostly yellow, verify that the regulator is set for the
correct fuel. After adjustment, retest.
Some yellow streaking is normal during the initial start-up. Allow unit to oper-
ate 4-5 minutes and re-evaluate.
Figure
24: Checking
Flame
Characteristics
When correct color, carryover and size are verified, installation is complete.
Service
Before Calling
Service
Product Data Plate
See Use and Care Manual for troubleshooting
information. Refer to the Warranty
in the Use and Care Manual.
To reach a service representative, see the contact information at the front of the
manual. Please be prepared with the information printed on your product data
plate when calling.
The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service.
It is located on the frame near the drawer.
Open the drawer to view it.
Data Plate_
Figure 25: Data Plate
English 23
Advertisement
