Maintenance; Disposal And Recycling; Technical Specification - Prem-I-Air EH1710 Manual

Convector heater
Table of Contents

Advertisement

Before cleaning, turn the heater off, and disconnect from the mains supply. The
heater may then be cleaned using a damp cloth with a drop of washing-up liquid to
remove any dust or dirt from the case. Do no use stronger detergents or solvents
as these may damage the plastic.
Using a dry 1" (25 mm) paint-brush, remove any dust from the grilles.
If the mains lead is damaged, it must be replaced by the manufacturer or and
authorised service centre.
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal
is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer may
take the old appliance for disposal.
Dimensions (with feet):
Weight:
Power supply:
Power consumption:
2580

MAINTENANCE

If the mains plug needs to be replaced, proceed
as follows:
labelled "L".
labelled "N".
positioned correctly (over the outer sheath of the
cable) and it fully tightened.

DISPOSAL AND RECYCLING

TECHNICAL SPECIFICATION

Connect the brown wire to the terminal
Connect the blue wire to the terminal
Make sure that the cord-grip is
383×530×198 mm
2 kg
230 V ~
2 kW
6
Ver. 3 – 0918

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh1710blk

Table of Contents