Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Prem-I-Air EH1710
Summary of Contents for Prem-I-Air EH1710
- Page 1 EH1710/EH1710BLK 2kW Convector Heater 2580 Ver. 2 - 04/14...
-
Page 2: Before Use
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. -
Page 3: Assembly & Installation
ASSEMBLY / INSTALLATION For free-standing use: attach the feet to the underneath of the heater using the four 10 mm screws. The feet are placed at the end of the case. To wall-mount: Referring to the diagram opposite, draw a line approximately 270mm long vertically on the wall to mark the centre point of the heater. -
Page 4: Mounting Diagram
MOUNTING DIAGRAM 2580 Ver. 2 - 04/14... -
Page 5: Operation
OPERATION Power 750W Power 1250W 1&2. Power 2000W Thermostat Note: When heaters are turned on for the first time or when they are turned on after not being used for long period in time it is normal for that the heater may emit some smell and fumes. -
Page 6: Pat Testing
At time of going to press, the average cost of electricity is £0.145 per unit (kilowatt- hour). The amount you are being charged will be shown on your electricity bill. At this cost, the EH1710 will cost £0.29 per hour to run with the thermostat set to its maximum. -
Page 7: Disposal And Recycling
Power consumption: 2 kW SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of one year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void.