IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately.
ASSEMBLY / INSTALLATION For free-standing use: attach the feet to the underneath of the heater using the four 10 mm screws. The feet are placed at the end of the case. OPERATION Power 750W Power 1250W 1&2. Power 2000W Thermostat Note: When heaters are turned on for the first time or when they are turned on after not being used for long period in time it is normal for that the heater may emit some smell and fumes.
At time of going to press, the average cost of electricity is £0.145 per unit (kilowatt- hour). The amount you are being charged will be shown on your electricity bill. At this cost, the EH1710 / EH1710BLK will cost £0.29 per hour to run with the thermostat set to its maximum.
MAINTENANCE Before cleaning, turn the heater off, and disconnect from the mains supply. The heater may then be cleaned using a damp cloth with a drop of washing-up liquid to remove any dust or dirt from the case. Do no use stronger detergents or solvents as these may damage the plastic.
Page 7
ERP SPECIFICATIONS Model Number EH1710 / EH1710BLK Item Symbol Value Unit Heat Output Nominal Heat Output Minimum Heat Output (Indicitive) Maximum Continuous max,c Heat Output Auxiliary electricity Consumption At nominal heat output At minimum heat output At standby mode Type of heat input, for electric storage local space heaters only (single select)
Contact Details WA9 3EX SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of one years. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void.