Related Manuals for Prem-I-Air EH1442
Summary of Contents for Prem-I-Air EH1442
- Page 1 EH1442 2 kW Mica Column Heater 2 Heat settings Electronic thermostat with remote control Built-in carrying handle Durable Castors Safety overload cut-out Cable storage feature Page 1...
-
Page 2: Before Use
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. -
Page 3: Using The Remote Control
The digital display will display the room temperature. The up- and down-arrow buttons can be used to select full power or half power. This is indicated by segments to the right of the flame symbol. Small segment lit = half power. -
Page 4: Product Safety
PRODUCT SAFETY • This appliance is not intended for use by persons (including children) with reduced physical, sensory mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •... -
Page 5: Pat Testing
PAT TESTING When used in an office environment, this product must be safety-tested yearly by a qualified electrician (PAT Tested) in order to comply with the Electricity at Work Regulations. We recommend that it is PAT tested regularly when used in a domestic environment. - Page 6 If the mains lead is damaged, it must be replaced by the manufacturer or and authorised service centre. If the mains plug needs to be replaced, proceed as follows: • Connect the brown wire to the terminal labelled "L". • Connect the blue wire to the terminal labelled "N".
-
Page 7: Fault Finding
FAULT-FINDING If the appliance is not operating, proceed as follows: Check that the mains plug is firmly in the socket, and that the socket is switched ON. Check that at least one of the power control switches is switched ON. The appliance also has a overload protection device to prevent overheating. -
Page 8: Technical Specification
Operating current: 8.7 A SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of two years. Should this appliance be operated under conditions other than those recommended, at voltages other than the voltage...