Table of Contents
Advertisement
Battery indicator/wifi connection status light
1. The battery indicator is divided into red, yellow and green light.
2. Battery>30%, green light on.
3. Battery 10%~30%, yellow light on.
4. Battery<10%, red light on.
5. After the WIFI is connected to the base station, the indicator light is on, and different
colors will be displayed according to the battery.
6.If the WIFI is connected abnormally, the indicator will flicker with different colors.
Photo/video shooting mode switch
This button can also be used as a photo
or video shooting button.
1.Long press the button to start/end
video shooting.
2.Short press the button to take photos.
Remote controller alarm
When the remote controller is experiencing low voltage, the buzzer will alarm at 1HZ
frequency, and the battery indicator on the remote controller light will turn red.
1.The low voltage of the remote controller is battery <10%.
2.The battery indicator on the remote controller lights up in red.
3.Buzzer alarm.
14
Charging jack/power switch
1.The left USB jack is a built-in battery
charging jack.
2.The 3.5mm jack in the middle is currently
undefined and cannot be used.
3.The right switch is the power switch.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerRay and is the answer not in the manual?
Questions and answers
My Vision Plus app is not working
The Vision Plus app is not working with the PowerVision PowerRay because the newer versions of the app, such as version 2.0.0, require a user login that locks the interface. Users do not have access to this login, which prevents the app from functioning properly with the drone. Only older versions like 1.6.6 work without requiring the login.
This answer is automatically generated