Fujitsu LifeBook P1610 Technical Procedure page 6

37. Insert the latch into the rear
cover and secure it with 2 screws.
39. Secure the cables to the rear
cover with tape.
41. Secure the board to the rear
cover with 2 screws.
43. Secure it to the rear cover with 2
screws.
38. Place the hinge cover onto the
hinge and secure the hinge to the
rear cover with 4 screws.
40. Connect the cable from the
new rear cover assembly to the
Fingerprint sensor board.
42. Connect the cable to the Tablet
button board.
44. Place the LCD onto the digitizer.
Make sure there is no dust between
them.