Fujitsu LifeBook P1610 Technical Procedure page 3
Display rear cover replacement
Hide thumbs
Also See for LifeBook P1610:
- User manual (128 pages) ,
- Bios manual (28 pages) ,
- Technical procedure (9 pages)
Advertisement
13. Turn the Display back and lay it
down.
15. Extract 2 screws from the Display
hinge.
17. Remove 8 screw covers from the
front of the display.
19. Using the plastic pry tool pry
around the perimeter of the display
to release the front cover from the
rear.
14. Disconnect 2 Display cables from
the system board and the 2 antenna
cables from the WLAN Card.
16. Lift the Display off the lower
assembly.
18. Extract 8 screws from the front of
the display.
20. Gently slide the pry tool
between the screen and the front
cover to release the double sided
tape located there.
Advertisement
