Fujitsu LifeBook P1610 Technical Procedure page 5
Display rear cover replacement
Hide thumbs
Also See for LifeBook P1610:
- User manual (128 pages) ,
- Bios manual (28 pages) ,
- Technical procedure (9 pages)
Advertisement
29. Extract 2 screws from the
Fingerprint sensor board.
31. Remove the tape securing the
cables to the rear cover.
33. Lift the hinge out and slide the
hinge cover off.
35. Remove the copper tape
securing the 2 antennas and lift
them and their cables out.
30. Disconnect its cable and lift the
board out.
32. Extract 4 screws securing the
hinge to the rear cover.
34. Extract 2 screws from the display
latch and lift it out.
36. Insert the 2 antennas into the
new rear cover and secure them
with copper tape.
Advertisement
