Fujitsu LifeBook P1610 Technical Procedure

Display latch replacement

Hide thumbs Also See for LifeBook P1610:

LifeBook P1610

Display Latch Replacement

ESD Precautions are required when working on this LifeBook computer.

Make sure the LifeBook is turned off before beginning this procedure.

1. Turn the LifeBook over and

remove the battery

3. Extract 8 screws from the front of

the display.

2. Remove 8 screw covers from the

front of the display.

4. Using the plastic pry tool pry

around the perimeter of the display

to release the front cover from the

rear.

Table of Contents

Do you have a question about the LifeBook P1610 and is the answer not in the manual?

Page 1 LifeBook P1610 Display Latch Replacement ESD Precautions are required when working on this LifeBook computer. Make sure the LifeBook is turned off before beginning this procedure. 1. Turn the LifeBook over and 2. Remove 8 screw covers from the remove the battery front of the display.
Page 2 5. Gently slide the pry tool between 6. Lift the front cover off. the screen and the front cover to release the tape. 8. Insert the new latch and secure it 7. Extract 2 screws from the display latch and lift it out. with 2 screws.
Page 3 13. Replace the battery.