Cleaning And Care; Disposing - Bosch Rexroth Hagglunds VI 44 Series Installation And Maintenance Manual

4.4.1 Cleaning and care

Aggressive detergents may damage the seals on the hydraulic motor and cause
them to age faster.
▶ • Never use solvents or aggressive detergents.
▶ • If in doubt, check the compatibility of the detergent with the seal type
▶ (Nitrile or Viton) specified in the hydraulic motor.
Using a high-pressure cleaner could damage the speed encoder and the seals
of the hydraulic motor.
▶ • Do not point the high-pressure cleaner at sensitive components, e. g. shaft
seal, seals in general, electrical connections and speed encoder.
▶ For cleaning and care of the hydraulic motor, observe the following:
▶ • Plug all openings with suitable protective caps/devices.
▶ • Check whether all plugs and plug seals are securely seated to ensure that no
moisture can penetrate into the hydraulic motor during cleaning.
▶ • Use only water and, if necessary, a mild detergent to clean the hydraulic motor.
▶ • Remove coarse dirt from the outside of the machine and keep sensitive and
important components, such as sensors and valve blocks clean.

4.5 Disposing

When the system or a single component is worn out, it should be handled in an
environmentally friendly way. In general waste should at first hand be reused or
recycled followed by safe disposal.
Careless disposal of the system, its components and the oil can lead to pollution of
the environment. Please therefore observe the following:
• Dispose the product/components in accordance with the national regulations in
your country and/or your company-internal specifications.
• Dispose the oil according to the current applicable material safety data sheet.
Hägglunds VI, RE 15310-WA/10.2015, Intallation and maintenance manual, Bosch Rexroth Mellansel AB
CAUTION
CAUTION
Handling 59/68